Best Leveling Kit to Add Ground Clearance to Your Car

Every truck owner understands how important it is to lift their truck using only the best leveling kit. If you own a truck, you must have realized that the rear of your pickup is slightly raised than the front. That is okay, and there is nothing wrong with your truck. However, having a truck means that you will have heavy loads at the back on most occasions. Heavy loads will lower the rear side, and I am sure you don't want your truck to sag when you put some weight at the back; that is why your truck is not on the same level, and it does so when it is loaded.

However, you may not be the kind of person who would carry a heavy load at the rear side of a truck. If that's the case, your truck will be uneven, and the look may bother you, but there is a solution to that. You will need a leveling kit to even out your truck by lifting the front side by a few inches and putting the rear and the front side on the same height. With the few inches of lift, your truck even gets a little extra ground clearance for easy and free movement. Read on to see the best leveling kit for your pickup.

1. Rough Country 2" Leveling Kit

Sale
Rough Country 2" Leveling Kit for 2007-2018 Chevy/GMC 1500 | 07-21 SUV - 1307
  • Give your GM 1500 the perfect blend of performance, protection,...
  • Increase Ground Clearance for On and Off-Road Obstacles |...
  • Levels the Front with the Rear | No need to disassemble your...
  • Easy at Home Bolt-On Installation, Supported by RC.
  • Backed by Rough Country's Limited Lifetime Replacement Warranty.

When you want a leveling kit that does not require you to disassemble your struts to install, Rough Country 2-inch may be the best leveling kit that works that way. It lifts the front and the rear easily to increase ground clearance for both on and off-road obstacles, which in turn leads to a smooth ride, and you can also install larger tires once you get a perfect lifting and leveling.

With the Rough Country leveling kit, you will not feel limited by any means whatsoever because you can run up to a 32" tire while leveling the front of your truck with the rear. In addition, this kit has a high-quality silicone dust boot in the middle to prevent dirt and other debris from getting in and damaging your strut over time.

It also features a chrome-hardened piston rod and a high-quality spring preloaded with a strut head already installed to make your work even easier during installation. It is compatible with 07-18 Chevy Silverado/GMC Sierra 1500 and 07-20 Suburban Tahoe Yukon/XL|1307, and it Rough Country backs it with a lifetime warranty. However, it does not work with Magneride, Denali, and 07' Classic Models.

Pros

  • It is cost-effective
  • It requires little time to install
  • Lifts to 2 inches high
  • No modifications needed

Cons

  • The suspension noise it produces can be annoying
  • It is made with plastic which may not last long

2. MotoFab Lifts CH-2LM 2 Inch Leveling Lift Kit

MotoFab Lifts CH-2LM - 2 in Front Leveling Lift Kit that is compatible with Chevy/Gmc Pickup
  • Will Raise the front of your truck by a true 2"
  • Motofab Lifts are CNC machined out of billet aluminum then...
  • Can be installed in about 1 1/2-2 hours and does not require...
  • Made In The USA with a Lifetime warranty
  • Compatible with 2007-2021 Chevrolet & GM 1500 Pickups (old body...

Suppose you are planning to lift the front end of your Silverado comfortably without any modifications like rubbing or cutting. In that case, MotoFab front leveling kit is the best solution for that purpose. It raises a truck by two inches. It will also give your pickup a little ground clearance at the front, making it possible for you to install larger tires.

It is strong and durable as it's constructed with billet aluminum, which means that it can withstand daily use without wearing out quickly. In addition to that, it is coated with a black powder that makes it more corrosion and rust-resistant to hold up a little longer.

It requires a short time, about two hours, to install, which means you will not spend the whole day doing the same thing. MotoFab is made in the USA and has a limited lifetime warranty. You can use this leveling lift kit to raise the fronts of 2007-2019 Chevrolet and GM 1500 pickups with the old body style.

Pros

  • It is made with billet aluminum, therefore very durable
  • It takes a short time to install
  • It is pocket friendly
  • It is powder-coated to enhance its resistance to corrosion
  • It comes with hardware
  • It is made in the USA

Cons

  • This leveling kit comes with short bolts

3. KSP Lift Kit Front 2" Strut Spacers Leveling Lift Kit

Sale
KSP 2in Level Kits for F150 2004-2022,2" Front Leveling Lift Kits Compatible with Ford Expedition...
  • ❀ Compatibility: For 2004-2022 FORD F150 2WD/4WD; 2003 - 2018...
  • ❀ Attention: Will Raise your truck 2" in the front. Due to...
  • ❀ Safety: Even in extreme riding conditions, the leveling kits...
  • ❀ Aggressive Look: Give your car an aggressive look and offers...
  • ❀ Trustworthy Warranty: We offer "30-day refund, 24-month free...

KSP lift kit is suitable for raising your truck two inches in the front; however, due to suspension geometry, the ratio between kit thickness and lift height is not 1:1. Therefore, it is recommended that you align your truck after installation.

The leveling kits provide safety even in extreme riding conditions as it is constructed with an aircraft-grade aluminum billet and 12.9 grade solid bolts. In addition, this KSP lift kit is coated with a black powder which makes it resist corrosion and dust more effectively. This feature, in turn, makes it more durable.

You can give your Ford truck an aggressive look with this leveling kit as it offers extra ground clearance for you to install bigger tires, and one great characteristic is that its installation is easy, and it only takes a little of your time. Moreover, KSP leveling lift kit is compatible with various off-road models. KSP eeling lift kit includes installation instructions, installation hardware with 12.9 Grade, and 2 Aircraft billet front-strut spacers.

Pros

  • It is easy to install
  • It comes with all installation hardware
  • It is made with a durable billet aluminum
  • It is powder-coated to increase resistance to dust and corrosion

Cons

  • It starts making noise after being used for a while
  • The instructions are not very easy to understand

4. Maxracing 2" Front End Leveling Kit

Maxracing 2" Front End Leveling Kit Compatible with Avalanche Silverado Suburban 1500 Tahoe Sierra...
  • COMPATIBLE VEHICLES: Works with all OEM control arms. Not...
  • IMPROTANT NOTE: This spacer measures less than 2 Inches thick,...
  • Maxracing ITEM BENEFITS - Eliminates factory rake; Improves the...
  • PARTS INCLUDED - Front lower strut mount extensions and hardware...
  • ITEM SPECIFICS - Installation Time: 2-4 hours; Backspacing:...

If you want to eliminate the factory rake from your truck, you will need nothing but the best leveling kit to ensure you get a perfect front-end lifting, and that is exactly what you will get from Maxracing two-inch front leveling kit. Installing it is easy, and no modification is needed; you don't have to disassemble your struts to install it; only a simple bolt-on installation is needed.

Maxracing spacer is one inch thick but lifts the vehicle by two inches, and this difference is due to the suspension geometry. It takes about three hours to install; however, it is not compatible with the 2014-2018 Denali models and 2007 Classic models.

Mxracing two-inch front-end leveling kit includes front lower strut mount extensions and the hardware, consisting of two spacers, four bolts, eight washers, four nuts, and installation instructions. It is a complete package. It is compatible with various models, and this makes it highly versatile. However, it fits only the vehicles equipped with factory steel front lower control arms.

Pros

  • It is made with a durable material
  • Easy and fast installation
  • It is fairly priced

Cons

  • Some customers complain about the bolts being too long

5. AKM Front End Leveling Lift Kits| 2" Leveling Kit

2.5" Front Leveling Lift Kits for Silverado 1500 2WD/4WD 2007-2022, GMC Sierra 2WD/4WD 2007-2022,AKM...
  • TRUE 2.5" OF LIFT:Our kit will raise the front of your truck by a...
  • Durable&Safty:Made of the same material as the aircraft,which is...
  • EASY INSTALLATION:Bolt-on installation,requires no strut...
  • BENEFITS:Make the front and rear of the car level. Increase the...
  • Compatible with:2007-2022 Chevrolet Pickups Silverado 1500...

For a perfectly raised front end of our vehicle, you need the AKM 2 inch leveling kit as it provides a two-inch lift for the front side of your truck. The ratio between kit thickness and lift height is not 1:1, and due to suspension geometry, the spacer lifts the front end by two inches even though it is slightly less than 2".

AKM leveling kit is made with aircraft-grade aluminum, which is strong, light, and durable, and that means that it will level your vehicle for a long time. The leveling kits also provide safe driving even in extreme conditions, and the black anodized surface increases corrosion resistance, making them more durable.

Bolt-on installation does not require any strut preloading, cutting, or modification of any factory parts, and installation time is about 1-2 hours. In addition, you do not need special tools to install AKM leveling kits on your truck, and it comes as a complete package; with all the hardware and instructions required for its installation. The main benefit of this leveling lift kit is that it increases the distance between the frame and the ground, hence providing extra ground clearance to help you traverse rough terrain and have a smoother ride.

This leveling kit is compatible with 2007-2019 Chevrolet pickups, Silverado 1002WD/4WD, and 2007-2019 GMC Sierra 1500 2WD/4WD with the new body style, with six slugs. It is also covered by a two-year warranty so that you can buy it with full confidence.

Pros

  • It is made with a durable material
  • It is coated to enhance corrosion resistance
  • Installation is easy and fast
  • No modifications needed during installation

Cons

  • Short warranty compared to other leveling kits

Factors to Consider When Buying the Best Leveling Kit

When you need to raise the front side of your truck, you will need a good leveling kit. By so doing, the front side will be raised by a few inches to make it be on the same level as the rear end. However, you can also decide to lift the whole truck a little higher, in which case you'll need suspension lift kits. Both depend on you and how raised you want your truck to be. If you want only the front or the rear end to be raised, you will need a leveling kit; however, if you want the whole car to have an added lift, you will need a lift kit. To buy either, you may need to consider some factors first, and such factors include;

a). Make and Model of Your Vehicle

Leveling kits are designed for specific types of vehicles. Therefore, before you decide to buy it for your vehicle, ensure that they are compatible. For example, if you want a level suspension, you may need to check the height difference between the front and the rear end to see how high you want your vehicle lifted to achieve the same level.

Most leveling kits add one to two and a half inches to the front, but a two-inch rake is more common. Vehicles also vary in height, so a flexible leveling kit is better than one that is not flexible.

b). Vehicle Application

If all you want to achieve is level, you can use leveling kits to add a few inches to the front side of your vehicle. However, some people prefer it when their vehicles have a little rake. In such a case, if you are "some people," maybe you want your truck to be a little raised on one side, so lift kits can work perfectly, and so can leveling kits. In addition, rear leveling kits can help you achieve an extra lift on the backside for more towing power.

If you want to lift your vehicle for more ground clearance, you can use a full lift kit. Lift kits raise the entire vehicle's height, and they offer higher lifts than leveling kits and are generally more expensive and even difficult to install. Therefore, depending on what you want for your vehicle, you will know what kit to buy.

c). Budget

Leveling kits are generally more expensive than lift kits. Therefore, you will not have to spend a lot of money to level your truck. However, you always need to check your budget when buying a kit. Do not buy something very cheap only because you are on a budget; neither should you buy an overcharged leveling kit. Check your budget, and what you can afford, then that is what you should consider buying.

d). Ease of Installation

Nobody wants to buy an item that they will spend the whole day installing, especially if other options are easier and less time-consuming. For example, some leveling kits are easy to install and only require an hour or two, and you don't have to disassemble your current struts to fix them. On the other hand, installing some models is quite a hassle and may consume a lot of your time. Therefore, if there is an easier-to-install alternative and can perform well, it is only wise to opt for that.

Driving a truck with enough ground clearance feels great because you can smoothly drive even when you are off-road and still have a safe ride. When you lift your vehicle, you also have the advantage of using big wheels because the lift creates enough space that even larger tires can fit in perfectly. You have the option of increasing your tire size if you want to. However, driving a truck after leveling may not be as comfortable as you are used to, and you may need a few days before you finally get used to the changes made. I hope you enjoyed reading our article on the best leveling kit and that it has been helpful.