Most late-model cars employ electric motors called actuators to vary the air temperature and direction by opening and closing flaps in the heater box behind the dash. The best blend door actuator ensures that your car's air temperature and direction are customized to your preference. If your battery has died and cannot modify the air temperature, you will most likely need to recalibrate.
You most likely have a bad blend door actuator if your car heater blasts cool air, and you've examined both heater core hoses to make sure they're hot. You can diagnose and repair the problem within an hour. The cost of a replacement door actuator is less than $100. A shop manual, a 1/4-inch-drive socket set, and screwdrivers are all you'll need.
What is the best blend door actuator available?
Rank | Product Image | Product Name | Buy on Amazon |
|---|---|---|---|
1. |
|  | |
2. |
| | |
3. |
| | |
4. |
| | |
5. |
| |
What is a Blend Door Actuator?
Your car's temperature control system is controlled by the blend door actuator, a small electric motor. On the interior, it appears to be a small plastic box with a few plastic gears. It's so tiny that you could easily fit it in one hand if you attempted to remove it.
If you aren't a skilled mechanic or technician, though, you may have difficulty recognizing it. It also serves a vital purpose. The signals run through the blend door actuator when you crank the dial to increase or decrease the temperature or flow of air. The defrosters and other vents are also controlled by it.
If you have a recent model, your car may have two blend door actuators. In addition, your automobile will have two blend door actuators if your backseat has temperature and airflow intensity settings. Below is a compiled list of the best blend door actuator for your car.
The Best Blend Door Actuator
1. Air Door Actuator HVAC Blend Control Actuator
Air Door Actuator - Replaces 89018365, 604-106, 52402588 - Compatible with Chevrolet, Chevy, GMC...
- Replacement Air Door Actuator - The air door actuator controls...
- Replaces Part# 89018365, 604-106, 52402588, 16163982, 52402598,...
- Compatible Replacement for Chevrolet and GMC Vehicles - 1999-2012...
- This blend door or air door actuator features a redesigned...
- Lifetime Warranty - This air door actuator comes complete with a...
The Air Blend Door Actuator regulates the temperature of the air in your vehicle's air conditioning system as well as the recirculation air option. When the blend door actuator fails on a Chevrolet, Chevy, or GMC car, the airflow or temperature inside the vehicle will be inaccurate. However, the blend door actuators on Chevy Silverado, Chevy Tahoe, or GMC Sierra are simple to replace.
This item, also known as the air heater blend door, is an essential component of your Chevy's air conditioning system. The temperature actuator regulates the temperature of air blown out of the driver and passenger side vents. In contrast, the recirculation actuator determines whether air is recirculated inside the car or fresh air is taken in from the outside.
This actuator replaces the actuator that controls the air temperature to the passenger side air vents if your car has auto AC controls or manual AC settings. Chevrolet, GMC, and other vehicle brands and models are just used to identify which vehicles this item fits. They are not official GM or Dorman parts.
Pros
Cons
2. HVAC Air Door Actuator - Heater Temperature Blend Door Actuator
Sale
HVAC Air Door Actuator - Compatible with Chevrolet Impala 2004-2013 - Replaces 1573517, 1574122,...
- Replacement Air Door Actuator - Air Door Actuator sometimes...
- Compatible With Chevrolet, Cadillac, Buick & Pontiac Models...
- Replaces Part# 1573517, 1574122, 15844096, 22754988, 52409974,...
- Redesigned Housing - last longer than factory part. Each piece...
- Lifetime Warranty - If the part ever fails simply contact us and...
When the factory blend door actuator in your Chevy Impala or equivalent vehicle malfunctions, you may lose control of the air conditioning. Chevy, Buick, Cadillac, Pontiac heater, and air conditioning controls are restored with the new blend door actuators. This actuator regulates the temperature of the air vents on the driver's side.
This actuator controls the temperature of the air vents on the passenger side. This actuator determines whether air is recirculated within the car or brought in from the outside. It can be challenging to install parts on your vehicle. The experienced experts on staff can help you with installation and even correctly diagnose your vehicle.
The professionals will also give you an original repair manual to help you with the installation. In addition, multiple quality control checks are performed at each stage of manufacture to ensure that each part lasts for years. AA Ignition is a branch of GWA Auto Parts.
AA Ignition, based in beautiful South Florida and created by long-time automobile enthusiasts, takes pleasure in offering high-quality products at an affordable price. AA Ignition is the company that makes this item. General Motors, Chevrolet, Buick, Cadillac, Pontiac, and Dorman are exclusively used to refer to the vehicles and part numbers that this item replaces.
Pros
Cons
3. PUENGSI HVAC Blend Door Actuator for Chevy Impala
PUENGSI HVAC Blend Door Actuator Replacement for Chevy Impala 2004 2005 2006 2007 2008 2009 2010...
- 【FUNCTION】: Replacement Air Door Actuator controls the...
- 【COMPATIBLE】: Factory blend door actuator fits a variety of...
- 【REPLACE PART】: 604108, 604-108, 1573517, 1574122, 15844096,...
- 【Purchase Without Worry】: If the Blend Door Actuator Has any...
- 【EASY INSTALLATION】: Direct replacement for a proper fitment...
The air temperature from the car's air conditioning vents and recirculation or outside air is controlled by the replacement Air Door Actuator. A brand new actuator, high-quality aftermarket replacement for the vehicle's air conditioning that fits and functions just like the original factory part. The factory blend door actuator fits a range of Chevy, Cadillac, Buick, and Pontiac vehicles, including the Chevy Impala.
If you have any issues with the Blend Door Actuator, please get in touch with PUENGSI so that they can provide you with a satisfactory solution. Direct replacement for a proper fit for the driver and passenger and a quick and simple installation. After installation, remember to recalibrate your HVAC system.
Pros
Cons
4. Dorman 604-029 HVAC Blend Door Actuator for Select Models
Dorman 604-029 HVAC Blend Door Actuator Compatible with Select Models
- Direct replacement - this HVAC heater blend door actuator fits...
- Quality construction - durable plastic housing and motor/circuit...
- Excellent value - OE quality at a lower price
- Vehicle tested - has undergone on-vehicle testing to ensure...
- Ensure fit - to make sure this part fits your exact vehicle,...
Dorman is a significant car parts company based in Colmar, Pennsylvania, United States. From chassis to body, underhood to undercar, and hardware to complicated electronics, they offer an ever-changing catalog of parts for both light and heavy-duty cars.
This HVAC heater blend door actuator has been meticulously designed to match the quality and performance of the original blend door actuator. It is a direct replacement for the original equipment part on selected models. Construction is of high quality, with a robust plastic casing and an electric motor or circuit board.
Additionally, you get outstanding quality for a fraction of the price. Finally, it has been thoroughly tested in a vehicle to ensure proper fit and performance. Enter your vehicle's make, model, and trim level into the Amazon Garage to ensure this component fits your specific vehicle.
Pros
Cons
5. Air Door Actuator HVAC 604108 for Impala 2004-2013
Air Door Actuator HVAC 604108 Compatible with 2004-2013 Impala Blend Door Actuator
- 【Fitments】Air Door Actuator fits 2004-2013 Impala,2014-2016...
- 【Blend Door Actuator Replace OE#】604-108, 1573517, 1574122,...
- 【Function】Air Door Actuator sometimes called heater blend...
- 【Easy Installation】Direct replacement on driver and passenger...
- 【 High-Quality 】 Air Door Actuators with thicker casing makes...
2004-2013 Impala, 2014-2016 Impala Limited, 2005-2009 Allure, 2004-2009 XLR Air Door Actuator. The blend door actuator regulates the amount and temperature of air that enters the vehicle's cabin. A brand new, high-quality aftermarket air conditioning replacement that fits and works just like the original factory part.
You can get outstanding quality for a fraction of the price. For optimal fitment, direct replacement is required on both the driver and passenger sides. In addition, it lasts longer than factory hybrid doors on automobiles because of the thicker casing, and the internal circuit boards are more durable and resistant to high temperatures and vibration.
Pros
Cons
Signs That It's Time To Replace Your Blend Door Actuator
1. Incorrect Temperature
You can get the wrong temperature if your blend door actuator is entirely broken. Try blasting cold or hot air, and the air should come out according to your controls under typical situations. If you try to blow cold air, but it comes out hot, even after giving your car a few minutes to adjust, you probably need a new blend door actuator.
2. Inconsistent Airflow
If the airflow from your vents isn't consistent, there could be a problem with your blend door actuator. Because the blend door is moving back and forth, the airflow is diverted, resulting in irregular airflow from your vents.
3. Inconsistent Temperature
It could be a clue that your blend door actuator isn't operating correctly if the air temperature coming out of your car's vents is uneven. It changes between hot and cold without adjusting the settings.
4. Knocking
A failed blend door actuator is nearly always the source of knocking sounds. For example, when you start your car or turn on the air conditioner, you'll hear a knocking sound. It means your blend door actuator needs to be changed.
5. Clicking
A clicking noise emanating from the dashboard is another indicator that your blend door actuator is malfunctioning. Again, it could be loud or quiet, but it will be persistent and consistent. The sound will come from the location on your dashboard where your HVAC controls are located. If you hear a clicking sound, schedule an appointment with a professional as soon as possible.
Frequently Asked Questions(FAQs)
1. Can I Drive If My Blend Door Actuator Is Faulty?
You can drive safely with a damaged or malfunctioning blend door actuator, but not for long periods. The blend door actuator has no bearing on how your car drives because it is solely a comfort function in the main cabin. When it breaks, you may hear weird noises or have trouble regulating the temperature in your car, both of which are inconvenient. Deal with the issue as soon as feasible.
2. How to Replace a Blend Door Actuator?
You'll need a particular kit for a blend door actuator replacement, which you can obtain online or acquire from a local repair shop. However, you can save money on labor for a blend door actuator replacement by doing it yourself, but you have to pay for the kit.
To begin, remove the plastic cover from beneath the car's dashboard. Next, remove the bolts using a small socket and ratchet, then remove the plastic cover. You'll be able to examine the wiring, and numerous controls after the cover is removed. For example, the right-side temperature actuator, used for dual climate control, may be found here.
To disconnect the wiring safety clip from the actuator, you'll need a tiny screwdriver. Remove the electrical connector, and the actuator will be free. Check to see if any connections are broken or if there is any corrosion. There may be some more screws that are readily removed with the screwdriver.
Make sure you secure all of your screws, so you don't lose them. After removing all of the screws, you can pull out the actuator for continued operation. Also, make sure the airflow door isn't jammed by manually rotating it in both directions. Before installing the replacement actuator, make sure no obstructions are blocking the airflow door. Finally, remove the dust and debris.
The goal is to inspect the entire assembly rather than simply the actuator. Turn the blower motor on and work the door in each direction to verify the blend door operation and double-check that you are replacing the correct actuator motor. You will notice a temperature or vent level shift in the air. The actuator you purchase should be compatible with the current one.
Check that the wiring harnesses are the same, as they should match the terminals. It's now time to put the replacement actuator in place. Replicate the old actuator's position and put accordingly. Do not overtighten the screws since they are installed in a plastic casing that might break if overtightened. After you've finished with the screws, gently press the electrical harness connector into the actuator.
When you use this pushing action and hear a clicking sound, it implies the connector is installed correctly. It's time to replace the plastic cover once you've double-checked that all of the cables and bolts are firmly fastened. After you've installed the plastic cover, tighten it with the mounting screws and reassemble everything. After that, use the car's climate control system to see if the blend door actuator is blowing hot and cold air.
It should be fixed in most circumstances, but there's no harm in sending your automobile to a skilled mechanic if it isn't. There may be a significant problem, which is proven following a thorough examination. Look over some maintenance guidelines to ensure you're following the technique correctly and nothing gets frayed.