Toyotas of any kind are some of the most reliable and affordable cars. Getting a Toyota corolla will never be a bad idea. The Toyota corolla maintenance required light will automatically come on once you have clocked 4500-5000 miles. Servicing your vehicle will keep it running for longer.
What is A Maintenance Required Light?
When the "MAINT REQD" light comes on your dashboard, it means you need to go for an oil change as soon as possible. An oil change will keep your engine smoothly running for longer and keep your vehicle in peak shape for years to come. However, the light has no way of knowing if you went for an change of oil.
Therefore, it will stay on, annoying you at every turn. There is a way to reset the light so that it doesn't stay on even after you change the oil. The light should be reset when you go to get your servicing by a technician. However, sometimes they forget. So you might need to do it yourself.
Resetting The "MAINT REQD" Light
There are a few steps to reset the maintenance light yourself. First, you can easily reset the light on your Toyota corolla. It is important to note that these reset methods are compatible with most Toyota models. As long as your maintenance light is on after a servicing, then follow the next steps to resolve it.
a) Step 1
The first step will be to turn on your car. Turning on your car is should re-start all systems. Next, the light on your dashboard should go off. If this fails and the light is still on, follow the next steps.
b) Step 2
Start by turning your vehicle off. After this, press on the trip meter reset button. Continue to hold this button for a while. Then, release it when the light goes off.
c) Step 3
Turn the vehicle back on. This doesn't mean starting the engine. It just means turn the car on. Observe the odometer.
d) Step 4
Hold on the "reset" button and keep it in that position. Keep your eye on the odometer until it starts to display dashes. After the dashes, it will display zeros. Continue to hold the reset button in that position until actual numbers appear on the screen.
e) Step 5
Let go of the reset button. After the numbers appear on the odometer, release the reset button, and the light should automatically go off. However, in some cases, the light might not go off. In such a case, repeat the settings as highlighted from steps 1 through 6.
This technique is very useful for resetting the Toyota corolla maintenance light. However, some models have a slightly different method for resetting the light. With the right data, you should be able to reset the light on any Toyota corolla model. We have done this for you.
Why The Maintenance Light Comes On
The maintenance light should never be ignored. A service is important to conserve fuel consumption and keep your engine running smoothly. A well-maintained engine will last for long. Here are some reasons why the maintenance light comes on:
i) You need an oil change
ii) A tune-up is required
iii) A new timing belt is required
The Bottom Line
When the maintenance light comes on, you can still drive safely for about 300 miles before your car starts to have problems. Unfortunately, oftentimes technicians forget to reset the light. If they do, you can easily do it yourself by following the above steps.